Category: Sangoma Tutorials

Installing a Sangoma A200 card in 3CX

Installing a Sangoma A200 card in 3CX

Sangoma cards are known for their high quality and great echo cancellation modules so it makes sense to want to use them with 3CX, but the process can be a little confusing the first time. The reason it seems a little complicated is that you also need to install Sangoma’s NetBorder Express software. NetBorder Express [...]

Tags: , , , , , ,

Installing a Sangoma A101D card in 3CX

Installing a Sangoma A101D card in 3CX

Trying to get a Sangoma A101D PRI card working with 3CX can seem a little intimidating the first time since there is more to just plugging it in and having it work. The “secret sauce” is Sangoma’s software interface, NetBorder Express. What NetBorder Express does is it talks directly to the card and then creates [...]

Tags: , , , , ,

Installing a Sangoma A101 PRI Card into trixbox Pro

Installing a Sangoma A101 PRI Card into trixbox Pro

Getting a Sangoma A101 PRI card working in a trixbox Pro system is actually pretty simple and the Sangoma cards are the only interface cards actually certified by trixbox Pro. If you have the card inside the system during the actual installation, you are pretty much done unless you need to change some of the [...]

Tags: , , , , , ,

Sangoma Whitepaper: Reduce Asterisk System Load by 70%

Sangoma Whitepaper: Reduce Asterisk System Load by 70%

PSTN connections have always been a drain on system resources…

Tags: , , ,