Configuring Digium TDM410P/TDM800P Analog Cards with trixbox CE

Many people don’t realize just how easy it is to configure a Digium analog interface card with trixbox CE. Not that it is very difficult with other distros, its usually only a few simple commands, but trixbox CE makes it even easier with one command that configures the card very easily. The same setup-pstn command will work on all versions of trixbox CE since version 2.4.Once you have to card in the system, boot it up, log in as root and type the setup-pstn command. If you see the channels come up at the end then just type amportal restart and Asterisk will restart. Then you need to go into the web interface and make sure your trunks are configured properly. After that, you are ready to make and receive calls.

Feature Solutions Partner Links

• Digium
• Digium products on 888VoipStore.com
• Fonality / trixbox
• trixbox products on 888VoipStore.com

Tags: Asterisk, Digium, trixbox, trixbox CE, VoIP, VoIP Education, VoIP Hardware, VoIP Software, VoIP Systems